Back to products


EasyClick & Standard Metering

Three Phase EasyClick (35mm Center Pitch)

  • Class 0.5 accuracy
  • 100mA Secondary (EasyClick) / 100mV Secondary (Multi-Click)
  • RJ12 connector output
  • 35mm centres
  • 60-250A primary current options
Product information

The 3-in-1 current transformer range is for use with the Eastron RJ12 meters which combines three traditional current transformers in one moulding case with a RJ12 connection for simple and easy error free installation.

3-in-1 current transformers can be directly installed next to a three-phase moulded case circuit breaker, thus saving installation time where fitting three standard individual current transformers would be required. In addition the the 3-in-1 current transformers, there is also a solid core single pole current transformer available for single phase applications. All current transformers are supplied with a 1m connecting cable, with RJ12 connector termination at each end. 

It is typical in most installations that the current transformers are mounted on the left-hand side of the breaker so P1 is facing the correct way. However, it is also possible to mount the current transformer on the right-hand side with P2 facing the breaker. This is possible due to the meter having the option to reverse the flow to correct this type of application.  


Not yet registered or logged in? Click below to register or login to enable access to Eastron’s full range of product data sheets, manuals, MID certificates and protocol specification pdf downloads.